友情提示：本站提供全国400多所高等院校招收硕士、博士研究生入学考试历年考研真题、考博真题、答案，部分学校更新至2012年，2013年；均提供收费下载。 下载流程： 考研真题 点击“考研试卷””下载; 考博真题 点击“考博试卷库” 下载
导师信息
姓名 王敏杰
院系 机械工程学院
办公电话 0411-84708869
电子信箱 mjwang@dlut.edu.cn
更新时间 2010-7-29
工作经历：
1989年8月，大连理工大学机械制造及其自动化专业工学博士学位。
1995年8月～，大连理工大学机械工程学院教授。
1998年10月～，大连理工大学机械工程学院博士生导师。
2000年3月～，大连理工大学模具研究所所长。
2005年1月～，模塑制品教育部工程研究中心主任
2005年8月～2006年7月，英国利物浦大学工程系访问教授。
社会兼职：
中国生产工程学会常务理事
全国模具标准化技术委员会委员
中国模具工业协会顾问
中国模具工业协会技术委员会委员
中国模具工业协会教育培训部副主任委员
《模具工业》编委
《塑料科技》编委
研究领域（研究课题） ：
1.模具CAD/CAE/CAM技术
2.微成型与微型模具技术
3.高速切削与先进制造技术
4.高分子材料成型技术
5.水中航行体流体动力学
硕博研究方向：
出版著作和论文：
近年著作、教材:
1.实用塑料注射模设计与制造,主审,机械工业出版社,2000
2.冷冲模设计及制造,主审,机械工业出版社,2002
3.模具制造技术，主编，电子工业出版社，2004
4.中国模具工程大典（第9卷：模具制造），主编，电子工业出版社，2007
近年SCI、EI收录论文：
Modeling of process geometry in peripheral milling of curved surfaces，Journal of Materials Processing Technology, v 210, n 5, p 799-806, 2010
Experimental study of rheological characteristics of polymer melts under various die diameters，Journal of Dalian University of Technology, v 50, n 1, p 52-57, 2010
Adiabatic shear critical condition in the high-speed cutting，Journal of Materials Processing Technology, v 209, n 3, p 1362-1367, 2009
Microstructural study of adiabatic shear bands formed in serrated chips during high-speed machining of hardened steel，Journal of Materials Science, v 44, n 3, p 897-902, 2009
Size effect on static mechanics behaviors of isolator with chevron-shaped struts，Acta Armamentarii, v 30, n 11, p 1515-1521, 2009
Fabrication of microchannel cavity using a modified UV-LIGA process，Journal of Harbin Institute of Technology, v 41, n 5, p 106-109, 2009
Viscoelasticity modeling of polyurethane elastomer，Journal of Dalian University of Technology, v 49, n 4, p 512-517, 2009
Surface roughness in high-speed side milling of hardened mold steel，Journal of Dalian University of Technology, v 49, n 2, p 216-221, 2009
Calculating of the Temperature distribution of primary shear zone in orthogonal high speed cutting based on the non-uniform volume moving heat source，Materials Science Forum, v 626 627, p 99-104, 2009
Quality defects and analysis of the microfluidic chip injection molding，Materials Science Forum, v 628 629, p 417-422, 2009
Experimental study on the rheological characteristics of polymer melts under micro scale effect，Materials Science Forum, v 628 629, p 429-434, 2009
Numerical simulation and experimental study of polymer micro extrusion flow，2009 IEEE International Conference on Mechatronics and Automation, ICMA 2009, p 3155-3160, 2009
Finite element simulation of cutting temperature field during high speed machining hardened steel based on ABAQUS，2009 2nd International Conference on Intelligent Computing Technology and Automation, ICICTA 2009, v 3, p 341-344, 2009
Mechanism of material softening in primary shear zone during serrated chip formation in high speed machining of high strength steel，Key Engineering Materials, v 407-408, p 504-508, 2009
Cyclostationarity analysis and diagnosis method of bearing faults，Proceedings of the 2009 IEEE International Conference on Automation and Logistics, ICAL 2009, p 576-581, 2009
Analysis and numerical simulation of polymer melt filling in micro injection molding，Chinese Journal of Mechanical Engineering, v 44, n 9, p 43-49, 2008
Study on micro-scale effect on impact of polymer melt wall slip，Journal of Materials Engineering, n 10, p 16-20+24, 2008
Effect of process variables of cryogenic treatment on mechanical properties and microstructure of W6Mo5Cr4V2 steel，Journal of Materials Engineering, n 6, p 40-43, 2008
Chip morphology and cutting forces in high speed end milling of hardened P20 steel，China Mechanical Engineering, v 19, n 2, p 170-173+187, 2008
An allowance scheduling strategy for cutting force regulation in peripheral milling，Journal of Dalian University of Technology, v 48, n 6, p 830-834, 2008
Experimental investigation of high speed end milling of hardened P20 steel，Journal of North University of China (Natural Science Edition), v 29, n 5, p 399-404, 2008
Optimization design method of extrusion die for complex profile，Journal of Dalian University of Technology, v 48, n 2, p 198-204, 2008
A method for fe simulation of serrated chip formation during high speed machining hardened steel，2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008, p 1408-1412, 2008
A dynamic model for a rotating beam subjected to axially moving forces，Journal of Sound and Vibration, v 308, n 3-5, p 674-682, 2007, Vibro-Impact Systems
Research on effects of injection process parameters on the molding process for ultra-thin wall plastic parts，Journal of Materials Processing Technology, v 187-188, p 668-671, 2007
Dynamics of a rotating shaft subject to a three-directional moving load，Journal of Vibration and Acoustics, Transactions of the ASME, v 129, n 3, p 386-389, 2007
Cutting forces in high speed milling of hardened steel P20 and 45，China Mechanical Engineering, v 18, n 21, p 2543-2546, 2007
Optimization design in cooling channels of vacuum calibrator for plastic profile extrusion，Journal of Dalian University of Technology, v 47, n 4, p 533-538, 2007
Study on effects of heat transfer coefficient between polymer and mold on melt filling flow in micro injection molding，Polymeric Materials Science and Engineering, v 23, n 6, p 169-172, 2007
Study on microscopic characteristics of adiabatic shear bands in the serrated chips formed during high speed machining，Explosion and Shock Waves, v 27, n 1, p 91-96, 2007
Study on the influence factors on the filling flow for polymeric melt in micro injection molding，Journal of Plasticity Engineering, v 14, n 6, p 185-189, 2007
Finite element simulation of the process of orthogonal metal cutting based on the ANSYS/LS-DYNA，Transactions of the Chinese Society of Agricultural Machinery, v 38, n 12, p 173-176, 2007
Study on the effects of wall slip on melt filling flow in micro injection molding，China Mechanical Engineering, v 18, n 16, p 1995-1999, 2007
An approach of bearing fault detection and diagnosis at varying rotating speed，2007 IEEE International Conference on Control and Automation, ICCA, p 1634-1637, 2008
White layer and surface roughness in high speed milling of P20 steel，Precision Surface Finishing and Deburring Technology - 9th International Symposium on Precision Surface Finishing and Deburring Technology, ICSD2007, v 24-25, p 45-54, 2007
A calculational model of shear strain and strain rate within shear band in a serrated chip formed during high speed machining，Journal of Materials Processing Technology, v 178, n 1-3, p 274-277, 2006
Research on the CAE technology and optimization design method of extrusion dies for plastic profiles，China Mechanical Engineering, v 17, n SUPPL., p 189-192, 2006
Review of high-speed machining of hardened steels，China Mechanical Engineering, v 17, n SUPPL. 2, p 421-425, 2006
Manufacturing technology of plastic profile extrusion die based on surface reconstruction，Transactions of the Chinese Society of Agricultural Machinery, v 37, n 7, p 167-170, 2006
Research on accord evaluation of tolerance zone of tangent column radius，Journal of Dalian University of Technology, v 46, n 1, p 40-44, 2006
Research on effects of injection process parameters on molding process for ultra-thin wall plastic parts，Journal of Dalian University of Technology, v 46, n 2, p 198-201, 2006
Feedrate scheduling in die-cavity roughing based on cutting force surface model，Journal of Dalian University of Technology, v 46, n 4, p 516-522, 2006
Research on shear deformation localization in high-strength steel during orthogonal cutting，Journal of Dalian University of Technology, v 46, n 3, p 355-360, 2006
A fault diagnosis method of rolling bearings using empirical mode decomposition and Hidden Markov Model，Proceedings of the World Congress on Intelligent Control and Automation (WCICA), v 2, p 5697-5701, 2006
Some metallurgical aspects of chips formed in high speed machining of high strength low alloy steel，Scripta Materialia, v 52, n 10, p 1001-1004, 2005
Simulation on rule of shrinkage of large CPUE based on neural network，Journal of Chemical Industry and Engineering (China), v 56, n 8, p 1520-1525, 2005
Numerical simulation of transient temperature field for plastic profile extrusion dieDalian，Transactions of the Chinese Society of Agricultural Machinery, v 36, n 1, p 111-113+126, 2005
High performance strategy for die cavity machining oriented to tool sequence，Computer Integrated Manufacturing Systems, CIMS, v 11, n 9, p 1291-1295, 2005
Characteristics of adiabatic shear bands in the orthogonal, cutting of 30CrNi3MoV steel，Journal of Materials Processing Technology, v 168, n 1, p 102-106, 2005
Numerical analysis of influence of flow separation on extrusion flow，Journal of Dalian University of Technology, v 45, n 2, p 206-209, 2005
A novel automatic feedrate adjustment method for die-cavity roughing，Key Engineering Materials, v 291-292, p 625-630, 2005
Numerical simulation of the cooling process of extruded plastic profiles within vacuum calibrators，Key Engineering Materials, v 291-292, p 619-624, 2005
Study on key technologies of DNC system oriented networked manufacturing，Key Engineering Materials, v 291-292, p 667-672, 2005
Microstructure and hardness of adiabatic shear bands formed during orthogonal cutting of high strength steel，Material Science and Technology, v 12, n 6, p 602-605, 2004
Influence of technical parameter on the effect of RPM-CVI technology for carbon/carbon artificial bone，Journal of Materials Engineering, n 6, p 12-15+19, 2004
NC machining information integration technique based on Ethernet，Transactions of the Chinese Society of Agricultural Machinery, v 35, n 5, p 185-189, 2004
Research on extrusion flow laws based on numerical analysis，China Mechanical Engineering, v 15, n 18, p 1683, 2004
Adiabatic shear bands in 30CrNi3MoV structural steel induced during high speed cutting，Journal of Materials Science and Technology, v 20, n 6, p 775-778, 2004
Experimental study on adiabatic shear behavior in chip formation during orthogonal cutting，China Mechanical Engineering, v 15, n 18, p 1603, 2004
Microstructure observation of adiabatic shear bands in cutting low alloy steel，Journal of Dalian University of Technology, v 44, n 2, p 244-248, 2004
Study on optimization design method of plastic extrusion die based on numerical analysis，Chinese Journal of Mechanical Engineering, v 39, n 5, p 139-144, 2003
Research on CAD system for plastic profile extrusion die，Journal of Dalian University of Technology, v 43, n 5, p 627-631, 2003
Numerical analysis of effect of channel structure on plastic extrusion flow，Journal of Dalian University of Technology, v 43, n 4, p 442-446, 2003
Study on parametric modeling methodology for streamlines extrusion dies，China Plastics, v 17, n 8, p 83, 2003
The numerical simulation of thermal-gradient CVI process on positive pressure condition，Materials Letters, v 54, n 5-6, p 419-423, 2002
Application of genetic algorithm in optimize the parameters of isothermal CVI process for carbon/carbon composites，Journal of Materials Engineering, n 10, p 33-35+47, 2002
Shrinkage computation of injection molded parts，Chinese Journal of Mechanical Engineering, v 38, n 9, p 145-149, 2002
Research on CAPP system for injection mold，China Mechanical Engineering, v 13, n 22, p 1948, 2002
Analysis of flowing paths of injection mold cavity in plastic melt，Journal of Dalian University of Technology, v 42, n 2, p 200-203, 2002
科研成果及所受奖励：
授权国家发明专利8项。
在读学生人数 ：
硕士生12人，博士生12人，博士后1人。
毕业学生人数：
硕士41人，博士12人，博士后1人。
免责声明：本文系转载自网络，如有侵犯，请联系我们立即删除，另：本文仅代表作者个人观点，与本网站无关。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，请读者仅作参考，并请自行核实相关内容。
文章搜索
您现在的位置： 
